| 60"/67" MONARCH "VLN14" 4-AXIS CNC VERTICAL TURRET |
| LATHE W/DUAL PALLET CHANGER |
| New 1996, Serial No T-53088NC, Model VLN14 |
| |
| TO VIEW VIDEO: |
| Click Here To Watch Video 1 |
| |
| EQUIPPED WITH: |
| Fanuc 15TT CNC Control |
| (2) 57" 4-Jaw Chucks w/Offload & Set Up Station |
| (1) 5-Position Ram Type Turret Head |
| (1) Square Ram Type Side Head |
| Chip Conveyor |
| Coolant System |
| |
| CATALOGUE SPECIFICATIONS: |
| Chuck Diameters | 57" |
| Swing, Maximum | 67" |
| Side Head Turning Diameter, Maximum | 61" |
| Side Head Turning Diameter, Minimum | 10.5" |
| Side Head Horizontal Travel | 26" |
| Side Head Vertical Travel | 63" |
| Side Head Travel Below Table | 11" |
| Height Under Cross Rail, Maximum | 66.1" |
| Cross Rail, Vertical Travel | 53" |
| Cross Rail, Rapid Traverse Rate | 16 IPM |
| Cross Rail, Fine Positioning Rate | 0.4 IPM |
| Horizontal Head Travel | 63.6" |
| Vertical Head Travel | 30" |
| Turret Head Index Time | 5 Seconds |
| Head Feed Rates, Vertical/Horizontal | 0.01 to 250 IPM |
| Table Speeds, Range | 2.7 to 235 RPM |
| Feed Drive Motors, Each Axis | 5 HP |
| Motor Horsepower | 75 HP |
| Weight Approximately | 64,000 LBS |
| |
| PRICE: F.O.B. OUR WAREHOUSE | $25,000.00 |