| #NL2500/700 MORI-SEIKI 2-AXIS CNC SLANT BED |
| TURNING CENTER |
| New 2004, Serial No NL251DG0181, Model NL2500/700 |
| |
| EQUIPPED WITH: |
| Mori-Seiki #MSX850 CNC Control - Tool Presetter |
| 12" 2-Jaw Chuck |
| JIS #A2-8 Spindle Nose - Tailstock (Missing Quill) |
| 12-Position Turret |
| Storch Magnetics Coolant System w/Chip Conveyor |
| |
| CATALOG SPECIFICATIONS: |
| Spindle Hole Diameter | 3.6" |
| Swing Over Bed, Maximum | 36.4" |
| Swing Over Cross Slide | 29.7" |
| Bar Diameter Capacity | 3.1" |
| Turning Diameter, Maximum | 14" |
| Turning Diameter, Standard | 10.8" |
| Turning Length, Maximum | 27.7" |
| Cross Travel (X-Axis) | 10.2" |
| Longitudinal Travel (Z-Axis) | 31.3" |
| Spindle Speeds, Range | to 4000 RPM |
| Rapid Traverse, X-Axis | 1181 IPM |
| Rapid Traverse, Z-Axis | 1181 IPM |
| Tailstock Travel | 28.9" |
| Tailstock Spindle Taper Hole | #5MT |
| Spindle Motor Horsepower, 30-Minute | 24.7 HP |
| Spindle Motor Horsepower, Continuous | 20 HP |
| Floor Space Machine, L x W | 122" x 76" |
| Overall Height | 84" |
| Weight Approximately | 12800 LBS |
| |
| Note: This Machine Is Missing The Quill For The Tailstock. |
| Can Be Run As A Chucker As It Sits. |
| |
| PRICE: F.O.B. OUR WAREHOUSE | $29,500.00 |