| Model No. 13 GLEASON Universal Angular |
| Bevel Testing Machine, Serial No. 18943 |
| |
| Suitable for the running testing/checking for smoothness |
| and quietness of operation, and inspection of actual tooth |
| contact, under load, (tooth bearing), on a wide variety of |
| straight and curved tooth bevel gears of any shaft angle, |
| including hypoid, spur, helical, internal gears, |
| as well as worm and worm wheel combinations up to 13” maximum diameter. | |
| |
| EQUIPMENT / FEATURES: |
| 4 speed main drive motor w/drum switch speed selector |
| 3 HP, 3phase, 60 cycles, 220 volts |
| 2-step drive pulley |
| Forward/reverse direction spindle rotation via push button |
| Manual spindle braking, with load meter |
| Full complement of electrics (motors/controls) |
| Hand-wheels, guards, covers |
| |
| PRINCIPAL SPECIFICATIONS: |
| Maximum diameter gear (nominal) | 13" (330.2mm) |
| Range of angles | 0 to 180 degrees |
| Range of offset pinion spindle: Above center | 8" (203.2mm) |
| Range of offset pinion spindle: Below center | 2" (50.8mm) |
| Max. center distance, (spurs, helicals and herringbones) | 8" (203.2mm) |
| Drive spindle bore (large end) | 3-29/32" (99.2mm) |
| Drive spindle bore, (taper per ft) | 39/64" (15.478mm) |
| Brake spindle bore, (large end) | 2-19/64" (58.34mm) |
| Brake spindle bore, (taper per ft) | 1/2" (12.7mm) |
| Floor space | 60.5" x 80.5" (1537x2045mm) |
| Approx. machine net weight | 5,200 lbs. (2364 kGs) |
| |
| PRICE: F.O.B. OUR WAREHOUSE | $11,500.00 |